- Choose from Several Clipless Monster Truck Bodies (sold separately)
- Quick one-hand installation and removal
- Pivoting rear latch mechanism
- Eliminates body posts and clips
- Reinforced for extra protection
- VXL-8s™ Waterproof Electronic Speed Control
- 8s LiPo compatible
- Built-in cooling fan
- Machined heat sinks
- 10-gauge silicone wire
- Integrated protection circuits
- LED status lights
- Velineon® 1200XL Brushless Moto
- 4-pole 1275 Kv
- 5 mm output shaft
- Aluminum slip-on heat sink
- Dual motor cooling fans
- 50+ mph with Two 4s LiPo Batteries and Included Optional Pinion Gear
- Traxxas Stability Management® (TSM)
- Helps prevents spinouts and loss of control
- Adjusts from off to 100% assistance from the transmitter
- Helps prevents spinouts and loss of control
- Adjusts from off to 100% assistance from the transmitter
- TQi™ 2.4 GHz High Output Radio System
- Traxxas Link™ enabled
- 2.4 GHz 5-channel micro receiver (6533) with fail-safe security and integrated telemetry ports
- Automatically stores and loads settings for up to 30 Traxxas Link-enabled models
- Multi-Function knob
- Adjustable steering and throttle percentage (dual rates)
- Adjustable steering and throttle sensitivity
- BEC Voltage and Motor Temperature Sensor installed
- 8s Driveline
-
- Machined, hardened steel pinion and spur gear
- Full-time shaft-driven 4-wheel drive
- Heavy-duty steel CV driveshafts with laser etching
- Beefed-up steel differential output cups
- Splined aluminum center driveshaft
- Machined aluminum stub axles
- Torque-Biasing Center Drive™ absorbs shocks and distributes power to all four wheels
- 24 mm splined wheel hexes
- Sealed, silicone fluid-filled diffs with large module ring and pinion gears
- Fixed Motor Mounting System
- Rigid aluminum motor mounts
- Preset gear mesh adjustments
- No manual adjustments required
- Motor retention separate from gear mesh
- Heavy-Duty Modular Composite Chassis
- Interlocking front and rear bulkheads
- Motor mounts to rear bulkhead to eliminate gear crunching flex
- Easy to service and access components
- Driveline is sealed in the chassis to keep out dirt and grit
- Snap-Lock Battery Retention System
- No body clips or hook and loop straps
- Battery hold-downs pivot for easy access
- Adjustable for battery size
- More secure than conventional retention systems
- Integrated into chassis top brace for improved battery tray and chassis stiffness
- Bumpers & Skid Plates
- Front energy absorbing rubber impact cushion
- Lower front and rear skids for impact and abrasion resistance
- Integrated nerf bars for side impact resistance
-
Steering
- 450 oz-in torque
- Aluminum cooling fins
- 2085XL high-output metal-gear steering servo
- Fully-supported case mounting
- Double-shear, bearing supported servo horn
- Suspension
- Heavy-duty suspension arms with double-shear connections
- High strength steel suspension pins used throughout
- Captured outer lower suspension pins
- Captured outer lower suspension pins with locknuts
- C-hub and steering block geometry maximizes steering angle
- Adjustable roll center
- Steel upper and lower tie bars
- Full contact sealed bearings used in exposed locations
- Aluminum GTX™ Shocks
- Machined aluminum threaded body
- Extra-large bore and capacity
- 5.2 mm damper shaft
- Lower seal cartridge includes integrated wiper seal combination
- Adjustable upper spring retainer
- Plastic shock caps with pivot balls
- Fixed shock locations
- Lower spring perches bolted on
- Wheels & Tires
- Dual-profile white monster truck wheels
- Huge 8.6" belted chevron-pattern monster truck tires
-
MODEL SPECS
Name: X-Maxx MT Chassis Type: Monster Truck Speed: 50+ mph with two 4s LiPo batteries and optional speed gear : 6 Scale: X-Truck Weight: 19.1 pounds (8.66 kg) Length: 30.67 inches (779 mm) Width: 21.3 inches (540 mm) Front Track: 21.3 inches (540 mm) Height: 13.99 inches (355 mm) 
Wheelbase: 18.92 inches (480 mm) Center Ground Clearance: 4.2 inches (107 mm) Drive System: Shaft-driven 4WD Drivetrain: Shaft-driven 4WD Transmission: Single speed Differential Type: Sealed, hardened steel bevel, limited slip Gear Pitch: 1.0 metric pitch Servo: 2085XL metal gear ultra-high-torque waterproof Radio System: TQi™ 2.4 GHz 2-channel transmitter with wireless module Battery Compartment Specs: 197 mm X 52 mm X 44 mm
OTOR SPECS
Motor Name: Velineon 1200XL Type: 1275 Kv sensorless brushless Weight: 23.44 ounces (665 g) Length: 4.32 inches (110 mm) Diameter: 1.88 inches (48 mm) Shaft Size: 5 mm Connector Type: 6.5 mm bullet connectors
ESC SPECS
ESC Name: Velineon VXL-8s Type: Brushless Case Size: 2.23 inches (58 mm) / 2.83 inches (72 mm) / 1.81 inches (46 mm) Weight: 7.60 ounces (215.5 g) Motor Connectors: 6.5 mm bullet connectors Battery Connectors: Traxxas High-Current Connectors Power Wire: 10 gauge Maxx® Cable
Sold out
SKU: 77036-4
Traxxas X-Maxx MT Chassis
$1,099.95
AVAILABLE IN STORE ONLY
Reach out to us for additional information. 815-798-7260 or info@evshobbiesusa.com
Free Shipping On Orders Over $199.99 (Some Restrictions Apply)
Questions? Call 815-798-7260
Or send us an Email.
Mon-Fri: 8am - 3pm
Sat: 9am - 2pm
Sun: Closed
Info
Warranties
Our range of products come with warranties, ensuring your purchase is fully protected.
Free Shipping
Free Shipping On Orders Over $199.99. (Some Large Items Ship at $19.99 Flat Rate)
15-Day Guarantee
We want you to be
100% satisfied. If you are not happy, return it to us within 15 days.
USA Based
We are based out of the US and many of our products are made in the US.
You May Also Like
-
Arrma Mojave GROM Mega 380 Brushed 4x4 Small Scale Desert Truck RTR w/ Battery & Charger, Red/Black$169.99
Global Shipping
Most of our products ship around the world! (Some Restrictions Apply)
Satisfied or Refunded
If you’re not happy, we’re not happy.
Top-notch Support
Get help from people who love this hobby as much as you do.
Shop With Confidence
Secure payment processing, and variety of methods available.
- Choosing a selection results in a full page refresh.
- Opens in a new window.
